Overclocking Processor

Overclocking Processor

If you overclock a new study, starting with just the computer that already exists. Even better if you have a computer that is not in use. For example , PCplus intentionally use the system is quite old.

1. Computers used Pentium-4 3GHz with standard cooling. As a supporter, Asus motherboard with the i875P chips set the two-chip memory 512MB Kingston DDR400, VGA Radeon 9600Pro, and the power supply Enlight 420 watt use. No ba bi bu again, let's go directly to how to overclock the processor. In the Asus motherboard that uses AMI BIOS, the option to work especial system performance have on the menu "Advanced". In the "Configure System Frequency / Voltage" and select the option "AI overclock Tuner". Change the setting from "Standard" to "Manual".
2. Prior to overclock the processor, it is first sent down the memory frequency from 400 MHz to 266 MHz. The goal is to avoid failure if the memory overclock is not able to work on the 400MHz frequency. Then, what the relationship between the processor with the memory? On this system, every increase in the frequency of 1 MHz processor, memory frequency will also increase. For that, we need to create a permanent memory in the frequency that the used memory is supported.
3. So that the AGP and PCI bus does not participate in the overclock, make sure the AGP and PCI still working on 66 and 33MHz frequency. When the AGP and PCI frequency increases, the computer will work better on the graphics storage media and hard disk alias. However, the patient well. Now this we used to overclock the processor. Moreover, overclocking VGA and storage media have a big risk.
4. Because the processors have the multiplier locked (can not be increased), performance digenjot with the FSB or the CPU External Frequency. Fluke, the processor Pentium-4 3GHz pcplus that use the standard 200MHz (800MHz FSB quad pump). Try to increase the number of up to 10 MHz (see box "Tips" to determine the size of this figure). After that, save options and restart the computer BIOS.
5. Pasa during POST (Power On Self Test) that appears after the computer enggak old flame, you will see the processor speed is increased. In the picture that appears when the CPU External Frequency is increased from 200 to 210MHz. With multiplier (multiplier) x15 processors, from 3000MHz processor speed 3160MHz now have (rounded up). Leave it to continue its work until the computer into the operating system. After that, run the software you normally use for work. If the computer is still able to run all perfectly, return to BIOS and raise again the CPU External Frequency. The more its about 5 MHz to 10 MHz. Continue to do this step until you become your PC unstable. If your PC already have signs, "ngaco", return the rule to the BIOS settings when your PC's performance still mulus. If you still do, please back up the CPU External Frequency, but the number is now 1 to 3 MHz only.
6. Pcplus prosesornya can increase the speed of 3000MHz and 3375MHz to be 3300MHz. Pcplus do not overclock more because the show already signs that the system is not stable. For example, an application that is used to test pcplus always a hang, loading failed. When the road works, eh test results showed a decrease in performance, not increase. Pokonya not comparable with the overclock that have been done. In addition, the temperature of the processor in the BIOS also shows the position of a little dangerous. At the beginning of the beginning of the temperature-processor is in the range of 47 degrees Celsius, after overclock this temperature reached 55 degrees Celsius.

TIPS: experiment

What is the value of speed must be entered in the BIOS for overclocking? There is no definitive answer to this. People who extremes akan may enter a number that can be spelled going "mad", for example, add 100 from the existing standard-if the number in the BIOS 200, he entered 300. However, there are also people who play safe. He simply add the number 10 of the existing.

Nah, pcplus recommend a second course. Add 10 first number of the existing. Then, try to overclock its results. What the computer is still stable? If still, add 5 more from the last one. Try again. Still stable? More 5. If you are not stable, down 2 and try again. If stable, try to add 1. If it is still not stable down again.

The search-search Himself the most fitting number to overclock your PC. Keep in mind also, if you successfully add up to 50 numbers, not necessarily your friends as much as it can. Friend can you be more or less. Each of the hardware, although the same brand and type, its ability to overclock different.


WARNING: The author and pcplus is not responsible for damage due to overclock the system is done. Please note, the damage due to overclocking will be abort the warranty on the products you buy from a store or distributor of the product concerned.

source: PCplus and http://tekno.kompas.com